Ricoh AP204 Operator's Manual page 160

Reference
For more information, refer to the Operation Instructions of your printer.
Note
Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
In the [Printers] window, highlight the icon of the printer you want to use
by clicking it. On the [File] menu, click [Properties].
C
Click the [Ports] tab, and then click [Add Port].
D
In the [Available Printer Ports] box, highlight [Multi Direct Print] by clicking it,
and then click [New Port].
The [Select Printer] dialog appears, and the printers which can print with TCP/
IP are displayed.
Limitation
If PRINTER MANAGER FOR CLIENT is not installed in your computer,
printers which can print with TCP/IP are not displayed.
Printers might be displayed when NetBEUI is selected as a protocol. How-
ever, the Network Interface Board does not support NetBEUI printing.
Note
The printers which have replied to a broadcast from the computer are list-
ed here. To print to a computer that is not on this list, or to directly input
the port name, highlight [New Printer] by clicking it, and click [Next >], and
then input the port name with procedure F.
E
Select the printer you want to use by clicking it, and click [Next >].
Reference
If you want to know more about a particular item in the dialog, refer to
P.61 "Multi Direct Print".
Note
You can identify the "Printer Name" and "Address" on the "configuration
page" printed by the printer.
F
To confirm that the port name of the printer is correct, click [Next >].
If you did not select a printer with the previous procedure, you must input
the IP address of the Network Interface Board into the [IP Address] box.
Note
You can input the host name or a domain name instead of an IP address
into the [Port Name] box.
When you use DHCP to assign IP addresses to Network Interface Boards,
you can use a printer name as the host name. Consult your network ad-
Preparing for a Network Connection
2
17