Ricoh AP204 Operator's Manual page 154

C
Click the [Details] tab, and then click [Add Port].
D
In the [Add Port] box, click [Other], and select [Multi Direct Print] by clicking it,
and then click [OK]
The [Select Printer] dialog appears, and the printers which can print with TCP/
IP are displayed.
Limitation
If PRINTER MANAGER FOR CLIENT is not installed in your computer,
printers which can print with TCP/IP are not displayed.
Printers might be displayed when NetBEUI is selected as a protocol. How-
ever, the Network Interface Board does not support NetBEUI printing.
Note
The printers which have replied to a broadcast from the computer are list-
ed here. To print to a computer that is not on this list, or to directly input
the printer, highlight [New Printer] by clicking it, and click [Next >], and then
input the port name with procedure F.
E
Select the printer you want to use by clicking it, and click [Next >].
Reference
If you want to know more about a particular item in the dialog, refer to
P.61 "Multi Direct Print".
Note
You can identify the "Printer Name" and "Address" on the "configuration
page" printed by the printer.
F
To confirm that the port name of the printer is correct, click [Next >].
If you did not select a printer with the previous procedure, you must input
the IP address of the Network Interface Board into the [IP Address] box.
Note
You can input the host name or a domain name instead of an IP address
into the [Port Name] box.
When you use DHCP to assign IP addresses to Network Interface Boards,
you can use a printer name as the host name. Consult your network ad-
ministrator to confirm the printer name. For more information, refer to
P.87 "The Others"
Limitation
You cannot use a host name that begins with "%%".
G
Confirm the port name in the [Port Name] box, and click [Finish].
H
Confirm that the port name is displayed in the [Print to the following port] box,
and click [OK].
Configuring Windows 95/98
1
11