Setting Up For Printing; Making Paper Settings From An Application; Setting Up For Printing From An Application - Ricoh AP204 Operator's Manual

Using RICOH-SCRIPT2 with Macintosh

Setting Up for Printing

Making Paper Settings from an Application

A
Open the file you want to print.
B
On the [File] menu, click [Page Setup].
The [LaserWriter 8 Page Setup] dialog opens.
C
3
Make sure that the printer you want to use is shown in [Format for:]. Then,
use [Paper] to select the paper size your want to use.
Note
If your printer is now shown in the [Format for:] box, use the pop-up menu
to display a list of available printers.
Reference
The actual appearance of the [Page Setup] dialog depends on the applica-
tion you are using. See the documentation that comes with your Macintosh
for details.
D
After all the settings are the way you want, click [OK].
- Small Size Print Area - - -
This printer supports printing on print area such as "A4 Small" and "Letter
Small" when printing from a Macintosh, only with specific versions of the driv-
er. Printing with the LaserWriter 8.4x (or later) driver supports printing on both
standard and small print area. However, with the LaserWriter 8.3x (or earlier),
the small print area options are not displayed.
With LaserWriter 8.3x (or earlier), select A4, for example, and click [Options] in
the [Page Setup] dialog, then use the [Larger Print Area] option. Checking the [Larg-
er Print Area] produces the same printing result as the LaserWriter 8.4x (or later)
standard A4 print area. Unchecking the [Larger Print Area] produces the same re-
sult as the LaserWriter 8.4x (or later) "A4 Small" print area.

Setting Up for Printing from an Application

A
Open the file you want to print.
B
On the [File] menu, click [Print].
The [Printer] dialog opens.
38