Troubleshooting
B
Rotate the oil bottle lock levers to
release the bottle, and then remove
the oil bottle from the printer.
C
Insert the oil bottle into the printer.
When inserting, the side with the
label should be facing towards
you, and the mouse of the bottle
facing down. Rotate the oil bottle
lock levers back to their original
positions to lock the bottle in place.
6
D
Close the top cover. Press the cen-
ter of the top cove until it locks into
place.
E
Remove the ventilator cover.
88
F
Remove the ozone filter from in-
side the ventilator hole cover.
G
TPOH630E
Install a new ozone filter on the
ventilator cover.
H
Replace the ventilator hole cover
onto the printer.
TPOH640E
TPOH670E
TPOH680E
TPOH681E
TPOH671E