Ricoh AP204 Operator's Manual page 170

The input comments are displayed with the device name when using a utility
such as PRINTER MANAGER FOR ADMINISTRATOR.
I
In the dialog for selecting a network environment, place ' ' ' ' mark for [Net-
Ware] and remove ' ' ' ' mark for the [TCP/IP].
J
Click [Next >].
A dialog for configuring the NetWare environment appears.
K
Select [Print under Bindery] when printing under the Bindery mode, or select
[Print under NDS] when printing under the NDS mode by clicking it.
When you are using NetWare version 4.x or higher, you should select [Print
under NDS].
L
In the [File Server Name] box, input the name of the file server in which a
print server is to be created.
Clicking [Browse], you can select a file server among those listed in the Browse
dialog.
M
If you selected [Print under NDS], input the name of the NDS tree in which
the print server is created into the [NDS Tree] box, and input the context into
the [NDS Context] box.
Clicking [Browse], you can select a NDS tree and a NDS context among those
listed in the Browse dialogs.
As a context, object names are input from a lower object and divided by a pe-
riod. For example, if you want to create a file server into NETWORK under
DS, input "NETWORK.DS".
N
Click [Next >].
O
Input the name of the print server you are creating on the NetWare environ-
ment into the [Print Server Name] box.
The factory default name is already entered. You should change it if neces-
sary.
P
Input the name of the Printer into the [Printer Name] box, and the name of the
Print Queue into the [Print Queue Name] box.
The factory default is "Print Server Name" followed by "_1 _Q"( quotation
marks are not included). You should change it if necessary.
Q
If you selected [Print under NDS], input the volume of the print queue into the
[Queue Volume] box.
Clicking [Browse], you can select one of those shown in the Browse dialog.
R
Click [Next >].
A dialog to confirm the print environment appears.
Configuring the Network Interface Board Using the NIB Setup Tool
3
27