Setting Up Options - Ricoh AP204 Operator's Manual

Installing the IPDL-C Printer Driver

Setting Up Options

A
From the Program Manager [Main] group, open the [Control Panel] and double-
click the [Printers] icon.
The [Printers] dialog appears.
B
In the [Installed Printers] box, select the name of the printer you want to use
by clicking on it, and then click [Setup...].
A dialog for making printer driver settings appears.
C
Click [Setup] tab, and then click [Installable Options].
The [Installable Options] dialog appears.
D
4
Use the [Option Tray] listbox, to specify the optional tray unit.
Specifying the wrong tray here will make it impossible to install your tray
correctly.
E
Use the [Total Printer Memory] listbox to specify how much memory is installed
on the printer.
Specifying the wrong amount of memory here may cause printing problems.
Be sure to change this setting whenever you add more memory.
Reference
You can find out how much memory is currently stored in memory by print-
ing a Configuration Page on the printer. => P.101 "Printing the Configuration
Page"
F
Click [OK] to close the dialog.
G
Click [OK] to close the dialog.
H
Click [Close] to close the [Printers] dialog.
40