Using Ricoh-Script2 With Windows Nt4.0; Installing The Printer Driver - Ricoh AP204 Operator's Manual

Using RICOH-SCRIPT2 with Windows NT4.0

Installing the Printer Driver

For operation under Windows NT4.0, you should install both the Windows
NT4.0 PostScript driver and the PPD file.
Preparation
The following procedure describes installation when the printer is connected
to the computer via parallel interface.
Limitation
Installing the printer driver requires full control access rights. To install the
printer driver, log on as an Administrator or a Power Users group member.
Important
The CD-ROM containing the Windows NT Server network operating system
Version 4.0, or the Windows NT Workstation operating system is required for
installing the printer driver.
We recommend that you upgrade your Windows NT4.0 operating system to
the latest version before installing the printer driver. Contact your Windows
retailer for details about the latest version available.
Be sure to install the PPD file for Windows NT4.0. Do not accidently install
the PPD file for Windows 95/98.
A
Close all applications that are currently running.
B
Click [Start], point to [Settings], and then click [Printers].
The [Printers] window opens.
C
Double-click the [Add Printer] icon.
The [Add Printer Wizard] starts up.
D
After confirming that the [My Computer] option is selected, click [Next].
A dialog for selecting the printer port appears.
E
Check the check box of the port you want to use, and then click [Next].
A dialog for selecting the printer manufacturer and model appears.
F
Click [Have Disk].
A dialog for installing a driver from a disk appears.
G
Insert the CD-ROM that comes with the printer into your computer's CD-
ROM drive.
Using RICOH-SCRIPT2 with Windows NT4.0
2
19