Replacing The Fuser Cleaner - Ricoh AP204 Operator's Manual

Replacing the Fuser Cleaner

Replace the fuser cleaner after the mes-
sage shown below appears on the
panel display.
Change
Fuser Cleaner
R CAUTION
• When accessing the inside of
the machine, do not touch any
sections other than those speci-
fied in this manual. If you do, it
might result in receiving a burn
or an injury.
A
Slide the top cover open lever to-
wards the front of the printer, and
open the top cover.
B
Rotate the lock levers to release the
lock.
C
Grasping the fuser cleaner by its
tab, remove it from the printer.
D
With its roller facing toward you,
install a new fuser cleaner into the
printer.
E
While pressing down on the oil
bottle and the fuser cleaner, turn
the lock levers to their original po-
sitions.
F
TPOH620E Close the top cover. Press the cen-
ter of the top cover until it locks
into place.
TPOH650E
Replacing Consumables
TPOH660E
TPOH291E
6
89