Ricoh AP204 Operator's Manual page 278

D
Click [Configure].
A list of options appears.
E
Select the option you want to set up and the appropriate setting for it.
Note
If the option you want to set up is not displayed, the PPD file has not been
set up correctly. Check the name of the PPD file shown in the dialog.
Reference
For more information on options, see P.37 "Option Setup Dialog".
F
Click [OK].
The list of options closes.
G
Click [OK].
The [Chooser] dialog appears.
Option Setup Dialog
Note
Be sure to set up the options correctly. Otherwise, you cannot use the option,
even though it is physically installed to the printer.
If you do not know the amount of memory you need to select here, print a
configuration page, which shows how much memory is currently installed to
the printer. P.55 "Printing the Configuration Page"
Total Printer Memory
Use this to specify the amount of memory actually installed to the printer. The
following settings are available: [16 MB ], [32 MB ], [48 MB ].
Option Tray
Use this to specify if the optional tray unit is installed to the printer or not. The
following settings are available: [None], [Tray 2].
Reference
For more informations on options, see the printer's "Operating Instructions".
Setting Up the PPD Files and Options
3
37