Ricoh AP204 Operator's Manual page 31

Installing Options
E
Insert the printer board into the
printer. Fasten both screws.
2
Important
Make sure that both screws are
used to secure the printer board.
Note
A coin can be used to fasten the
screws.
F
Plug the printer's power cord back
into the printer and the wall out-
let. Turn on the printer's power
switch.
G
Print a configuration page to con-
firm that the module is properly
installed.
Reference
=> P.101 "Printing the Configura-
tion Page"
Note
You can check if the module is
installed properly by checking
the "Firmware Version" item of
the "Reference" on the configu-
ration page.
If the module is not properly in-
stalled, repeat steps A-F again. If
you fail again, contact your sales
or service representative.
12
TPOP320E