Understanding The Displayed Information; Print Job Information; Print Log Information - Ricoh AP204 Operator's Manual

Understanding the Displayed Information

This section describes how to read the displayed information about the status of
the Network Interface Board.

Print Job Information

The status of the print job can be viewed using the following commands.
• UNIX : Use the lpq command. Use the stat parameter with rsh, rcp or ftp. For
more information
• mshell : Use the status command
Item Name
ID
Source
Process
Status
Time

Print Log Information

This is record of jobs that have been printed up to now. The most recent ten
records are displayed.
This record can be displayed with the following commands.
• UNIX : Use the prnlog parameter with rsh, rcp, ftp
tion of Printer".
• mshell : Use the prnlog command
Item Name
ID
Source
Process
Bytes
P.58 "Status Representation of Printer".
P.70 "Status of Printer".
Meaning
Number of the print request.
The name of the host requesting the print job.
The type of print command.
Status of print job.
• Active
Printing or being prepared for printing.
• Waiting
Waiting to be transferred to the printer.
The time when the print request was received.
P.70 "Status of Printer".
Meaning
Printing request number.
The user name, workstation name or address of the host
that sent the print job.
The type of print command used.
The size of the file in bytes.
Understanding the Displayed Information
P.58 "Status Representa-
6
75