Table of Contents
Advertisement
Other Printing Problems
Problem
Image is printed on the reverse side of the
paper.
Multiple pages are fed through the printer
at once.
Paper misfeeds occur frequently.
Operation panel error message stays on
after removing the misfed paper.
It takes a long time for the printer to start
printing.
It takes too much time to complete the
print job.
Windows95, NT4.0
The computer doesn't recognize the in-
stalled printer options.
Windows3.1
The printer can't send the print job.
Action
Set the paper upside down.
Remove all the paper from the tray and
fan them gently.
Check the paper size settings. Use the rec-
ommended paper. Avoid using curled,
folded, or wrinkled paper, perforated pa-
per, or glossy paper.
Paper misfeed message will remain until
the front cover is opened and then closed.
Open the front cover and close it.
The machine might be in Energy Saver
mode or Low Power mode, which re-
quires more time for warming up and re-
suming the print job. If you can't wait,
change the settings of Low Pwr. Shift
Time and Low Power Timer.
The data is so large or complex that it
takes time to process it.
If the Data In indicator is blinking, the
data processing is being done.
Just wait until it is finished.
If the printer is not bi-directional, specify
which options you have installed using
the printer driver.
Refer to the HELP file of the printer driv-
er.
The memory buffer might be full. Set the
Print Manager to "OFF", or make the
time-out setting longer.
Other Printing Problems
7
57
Advertisement
Table of Contents
