Table of Contents
Advertisement
D
After confirming that "Config.
Page" is on the display, press { { { { { En-
ter} } } } } .
E
Press { { { { { Enter} } } } } again.
This prints the Configuration Page.
Important
If printing does not start, check
the panel display for any error
messages and take the action re-
quired to correct the problem.
=> P.56 "Error & Status Messages
on the Operation Panel"
F
After confirming that the "Config.
Page" Menu on the display, press
{ { { { { Escape} } } } } .
The following display appears.
<Menu>
List Print
G
You can find the crop marks on the
trailing edge of the configuration
page. Check if the left (1 1 1 1 1 ) and
right (2 2 2 2 2 ) margins on the trailing
edge of the configuration page as
shown in the illustration.
H
If the left and right margins are not
the same, use {U}
{U}
{U}
{U} and {T}
{U}
play "Maintenance", and then
press { { { { { Enter} } } } } .
The "Maintenance" menu appears.
<Maintenance>
1.Toner Level T
I
Use {U}
Registration", and then press { { { { { En-
ter} } } } } .
The following display appears.
J
Use {U}
istration.
The above shifts the image to the
right.
U
T
K
After you are finished, press { { { { { En-
ter} } } } } .
This registers your setting and re-
turns to the "Maintenance" menu.
L
Press { { { { { On Line} } } } } .
The normal display screen appears.
{T}
{T} to dis-
{T}
{T}
U
Cleaning and Adjusting the Printer
{U}
{U} and {T}
{U}
{T}
{T}
{T} to display "4.
{U}
{T}
UT/#
Tray2:W
-<-----+--- ->+
{U}
{U}
{U} and {T}
{T} to adjust the reg-
{T}
{T}
{U}
{T}
UT/#
Tray2:W
-(----- -----)+
Image
6
79
Advertisement
Chapters
Table of Contents
Troubleshooting
