Setting Menus; Rps2 Menu; Color Mode - Ricoh AP204 Operator's Manual

Appendix
I
Press { { { { On Line} } } } to enter the off-line mode.
The On Line indicator turns off.
J
Press { { { { Reset} } } } .
The printer resets and enters the RPS2 mode.

Setting Menus

Preparation
Before performing the following procedure, make sure that the printer lan-
guage is set to the RPS2 mode.
A
Make sure that the printer language is set to the RPS2 mode. Check if the
4
following message appears on the panel display.
RPS2
Ready
B
Press { { { { Menu} } } } .
The following message appears on the panel display.
<Menu>

RPS2 Menu

C
Make sure that "RPS2 Menu" appears on the display, and then press { { { { En-
ter} } } } .
The following message appears on the panel display.
<RPS2 Menu>

1.Color Mode

50
Power On Line Data In
Reset
Error
Menu Escape
Media Enter
TPOS040E
j
l
j
l