Ricoh AP204 Operator's Manual page 47

Setting Up the Printer for Network with the Operation Panel
6 Press { { { { { Enter} } } } } .
The configuration page is now printed. Check the contents of the configu-
ration page.
7 Press { { { { { On Line} } } } } .
The normal display screen appears.
8 Press { { { { { On Line} } } } } to enter the off-line condition.
The On Line indicator turns off.
9 Press { { { { { Reset} } } } } .
Address
3
Subnet Mask
A number used to mathematically "mask" or hide the IP addresses on the
network by eliminating those parts of the address that are alike for all the
machines on the network.
Gateway Address
A gateway is a connection or interchange point that connects two networks. A
gateway address is for the router or host computer used as a gateway.
Note
To get the addresses, contact your network administrator.
If you do not know the addresses, please use the default settings.
Access Control Address and Access Control Mask
Access Control Address and Access Control Mask are used to control the IP ad-
dresses that have access to the computer used for printing, with the IP address. If
it is not necessary for you to control the access right, select "0.0.0.0".
Note
When the setting of Access Control Address coincides with the masked result
of the IP address of the computer, print jobs from that IP address can be ac-
cepted by the network interface board.
For example, if you assign 192.168.15.16 as the Access Control Address to the
network interface board, the combination of the Access Control Mask and IP
address that can have access are as follows.
Access Control Mask
28
0. 0. 0. 0
255. 0. 0. 0
255. 255. 0. 0
255. 255.255. 0
255. 255.255.255
IP Address that have access
xxx.xxx.xxx.xxx
192.xxx.xxx.xxx
192.168.xxx.xxx
192.168. 15.xxx
292.168. 15. 16