Ip Dvmrp Trapflags - NETGEAR GSM7228PS Cli Manual

no ip dvmrp metric
This command resets the metric for an interface to the default value. This value is used in the
DVMRP messages as the cost to reach this network.
Format
no ip dvmrp metric
Mode Interface Config

ip dvmrp trapflags

This command enables the DVMRP trap mode.
Default disabled
Format
ip dvmrp trapflags
Mode Global Config
no ip dvmrp trapflags
This command disables the DVMRP trap mode.
Format
no ip dvmrp trapflags
Mode Global Config
ip dvmrp
This command sets the administrative mode of DVMRP on an interface to active.
Default disabled
Format
ip dvmrp
Mode Interface Config
no ip dvmrp
This command sets the administrative mode of DVMRP on an interface to inactive.
Format
no ip dvmrp
Mode Interface Config
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
5-8