Config Diffserv Policy Police Style Simple; Config Diffserv Policy Police Style Singlerate - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
This command can be issued at any time, but is only meaningful within the context of the police
simple, singlerate, or tworate command attributes defined for this class instance.
Format
Policy Type

config diffserv policy police style simple

This command is used to establish the traffic policing style for the specified class. The simple form
of the police command uses a single data rate and burst size, resulting in two outcomes: conform
and nonconform. The
policy and class, respectively. The conforming data rate is specified in kilobits-per-second (Kbps)
and is an integer from 1 to 4294967295. The conforming burst size is specified in kilobytes (KB)
and is an integer from 1 to 128.
For each outcome, the only possible actions are drop, markdscp, markprec, or send. In this simple
form of the police command, the conform action defaults to send and the nonconform action
defaults to drop. These actions cannot be changed directly with this command, but can be changed
through their respective config diffserv policy police action conform and nonconform commands.
Format
Restrictions
Policy Type
Incompatibilities

config diffserv policy police style singlerate

This command is used to establish the traffic policing style for the specified class. The singlerate
form of the police command uses a single data rate and two burst sizes, resulting in three
outcomes: conform, exceed and nonconform. The
of an existing DiffServ policy and class, respectively. The conforming data rate is specified in
kilobits-per-second (Kbps) and is an integer from 1 to 4294967295. The conforming burst size is
specified in kilobytes (KB) as an integer from 1 to 128. The exceeding burst size is specified in
kilobytes (KB) as an integer from 1 to 128. Note that the exceeding burst size must be equal to or
greater than the conforming burst size.
9-24
config diffserv policy police action nonconform send
<policyname> <classname>
In
and
<policyname> <classname>
config diffserv policy police style simple
<policyname> <classname> <1-4294967295> <1-128>
Only one style of police command (simple, singlerate, tworate) is allowed for a
given class instance in a particular policy.
In
Mark IP DSCP, Mark IP Precedence
202-10009-01
are the names of an existing DiffServ
and
<policyname> <classname>
are the names
Differentiated Services