Show Radius Accounting - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Timeout Duration
Accounting
Mode
If you include the optional
configured RADIUS servers is displayed.
IP Address
Port
Type
Secret
Configured
Message
Authenticator

11.2.9 show radius accounting

This command is used to display the configured RADIUS accounting mode, accounting
server and the statistics for the configured accounting server.
Format
Mode
If the optional token 'statistics
and the RADIUS accounting server details are displayed.
Mode
IP Address
Port
Secret
Configured
If you include the optional
configured RADIUS accounting server are displayed. The IP address parameter must
match that of a previously configured RADIUS accounting server. The following
information regarding the statistics of the RADIUS accounting server is displayed.
Accounting
Server IP
Address
11-18
The configured timeout value, in seconds, for request re-
transmissions.
Yes or No.
parameter, the following information regarding the
[servers]
IP Address of the configured RADIUS server.
The port in use by this server.
Primary or secondary.
Yes / No.
Enables or disables. the message authenticator attribute for
the selected server.
show radius accounting [statistics <ipaddr>]
Privileged EXEC
' is not included, then only the accounting mode
<ipaddr>
Enabled or disabled
The configured IP address of the RADIUS accounting server.
The port in use by the RADIUS accounting server.
Yes or No.
[statistics <ipaddr>]
IP Address of the configured RADIUS accounting server
Port-Based Access and Authentication Commands
v1.0, October 2008
parameter, the statistics for the