Config Dot1X Defaultlogin; Config Dot1X Login; Config Dot1X Port Users Add; Config Dot1X Port Users Remove - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config dot1x defaultlogin

This command assigns the authentication login list to use for nonconfigured users for 802.1x port
security. This setting is overridden by the authentication login list assigned to a specific user if the
user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Format

config dot1x login

This command assigns the specified authentication login list to the specified user for port security.
The must be a configured
<user>
Format

config dot1x port users add

This command adds the specified user to the list of users with access to the specified port. The
must be a configured
<user>
given access to all ports.
Default
Format

config dot1x port users remove

This command removes the specified user from the list of users with access to the specified port.
Format

config users defaultlogin

This command assigns the authentication login list to use for non-configured users when
attempting to log in to the system. This setting is overridden by the authentication login list
assigned to a specific user if the user is configured locally. If this value is not configured, users will
be authenticated using local authentication only.
Format
7-72
config dot1x defaultlogin <listname>
and the
<user> <listname>
config dot1x login <user> <listname>
and the
<user> <port>
Access to all ports
config dot1x port users add <user> <slot.port/all>
config dot1x port users remove <user> <slot.port/all>
config users defaultlogin <listname>
202-10009-01
must be a configured login list.
must be a valid port. By default, a user is
Switching Commands