Ip Dhcp Conflict Logging; Dhcp Server Clear And Show Commands; Clear Ip Dhcp Binding; Clear Ip Dhcp Server Statistics - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

7.2.5 ip dhcp conflict logging

This command enables conflict logging on DHCP server.
Default
Format
Mode
7.2.5.1 no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
Mode

7.3 DHCP Server Clear and Show Commands

This section describes the commands you to delete various DHCP information and the
commands you use to view DHCP configuration information and statistics.

7.3.1 clear ip dhcp binding

This command deletes an automatic address binding from the DHCP server database. If
"*" is specified, the bindings corresponding to all the addresses are deleted.
a valid IP address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0
is invalid.
Default
Format
Mode

7.3.2 clear ip dhcp server statistics

This command clears DHCP server statistics counters.
Format
Mode
DHCP Commands
enabled
ip dhcp conflict logging
Global Config
no ip dhcp conflict logging
Global Config
none
clear ip dhcp binding {address | *}
Privileged EXEC
clear ip dhcp server statistics
Privileged EXEC
v1.0, March 2006
is
<address>
7-11