Table of Contents
Advertisement
Software Revision and Hardware Information
The revision number of Agilent E5022/E5023 system software, serial number of modules
and instruments, part number and serial number of Buffer/Amplifier Board are reported in
[About E5022/E5023] menu.
1. Click on [About E5022/E5023] button to check the current software version and
module revision of the system. The E5022/E5023 revision shows the major revision
number. The revision number of service releases are not shown at this. When you
confirm if a service release software is installed, click [start][Programs][Agilent Hard
Disk ReadWrite Test System][Readme] on the windows 95/2000.
Figure 3-7
About E5022/E5023
NOTE
The E5036A module (VXIO :: 6 :: INSTR) and E5041A module (VXIO :: 11 :: INSTR)
will not report any module revision because it does not have any DSP chip (i.e, there is no
firmware). The spinstand with module address (ASRL1:: INSTR) will not report the serial
number. If BER module is installed in the system it will report the name of read channel
IC.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Software Revision and Hardware Information
51
Advertisement
Table of Contents
