Table of Contents
Advertisement
Stop Data Rate
NOP
Step
NOTE
To set the erase type (DC+ / DC- / AC), click on [More Config.], to open the setup menu
and select the type in the [Erase Type] parameter.
3. The [More Config.], [Pattern Config], [Register Config.] and [BER Config.] buttons
are added for additional configurations. Click on any of these buttons to set a new
parameter value as required by measurement applications. The [BER Config.] menu
have the same setting and format as the [Configuration] of the BER Main menu.
4.
Click the [Measure] button to start measurement. When [Auto Scale] is pressed the
graph scale will adjust itself automatically to its maximum and minimum values.
Measurement
The upper left portion of the menu shows the computed [Error Rate] based on the
Display
displayed [Data Rate] as pointed by the arrow in the graph scale.
5. Click the [Return] button to return to BER Main menu.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies the stopping point of the data rate.
Specifies the number of points to sweep the
data rate.
Displays the step by which data rate is
incremented. This parameter is computed and
updated automatically when you specify
[NOP].
Measurement
181
Advertisement
Table of Contents
