Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Figure 3-128
Delay / Aperture
Figure 3-129
Write Timing of Burst Pattern
NOTE
Due to internal constraints of E5037A (data generator module), data writing is
actually delayed by a value of 30
burst pattern). Thus, the user must compensate this value when setting the burst
length. Refer to "hpe5022_burstPatternConfig" function of the programming
manual for details.
208
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Aperture
Pattern Start Time
Pattern Length
Specifies the length of time to open the write
gate. See Figure 3-128 on page 208
Specifies the starting time to write the burst
pattern. See Figure 3-129 on page 208
Specifies the length of time to write the burst
pattern. See Figure 3-129 on page 208
×
16T (T=1/ f, where f is the frequency of the
.
.
.
Chapter 3
Advertisement
Table of Contents
