Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Figure 3-37
Stability Write Configuration
4. Click the [Measure] button to start measurement. Results are displayed after
Measurement
Display
5. Click the [Return] button to return to the Measure menu.
See also
See the "Stability Measurement function" section in Chapter 3 of the programming
manual.
84
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Write Pattern
Write Mode
measurement.
The window shows the measurement results of TAA from a specified number of
revolutions [# of Rev]. The mean, minimum, maximum and standard deviation of the
measured narrow band TAA are all displayed on the upper portion of the graph.
Specifies the write excitation pattern for
stability measurement.
Specifies the write data polarity when writing
the data. When 'Fixed' is selected the write
current direction of each write operation is the
always the same. When 'Continuous' is
selected the write current direction at the
beginning of write operation is the same as the
last current direction of the previous write.
Refer to the programming manual for details.
Chapter 3
Advertisement
Table of Contents
