Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Figure 3-54
Micro Track Profile Menu
2. Set the parameters, click on each button to enter a new value.
Track Offset Compensation
Channel Bit Rate
Write Current
Sense Current
Data Pattern
Track #
Start
Step
106
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Checking this box will activate a track offset
compensation function. See "Track Offset
Compensation Function" on page 274.
Specifies the speed at which data bits are
written on the media per second [bps].
Specifies the current applied to the write head.
Specifies the current applied to the read head.
Specifies the data pattern to be written on the
test track. To set the data pattern, click on the
[Configuration] > [Setup] > [Pattern Config]
buttons to open the data pattern menu.
Specifies the track number to be tested.
Specifies the starting point of erase offset in
building a micro track. See "Micro Track
Profile Measurement" on page 286 for
details.
Specifies the step by which to erase the test
track in order to create a micro track. See
"Micro Track Profile Measurement" on page
286 for details.
Chapter 3
Advertisement
Table of Contents
