Table of Contents
Advertisement
Figure 3-52
TAA Track Profile Menu - Track Offset Compensation Setup
•
Compensation Profile Setting
Size
Range
•
Compensation Pattern Setting
Auto Setting
Frequency
Offset
Aperture
Position
•
Compensation Revolution Setting
# of Revolution
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Measurement
Specifies the track profile points for a
calibration sequence in the track offset
compensation sequence.
Specifies the track profile range for a
calibration sequence in the track offset
compensation sequence.
Checking this box will define a
compensation pattern setting
automatically.
Specifies a frequency of the burst patterns.
Specifies a offset position of the burst
patterns.
Specifies a aperture time of the burst
patterns.
Specifies a burst pattern position from the
track center.
Specifies the average counts to measure a
position error signal (PES). The burst
pattern is measured during revolutions
specified by this number and calculates a
PES from the averaged value.
103
Advertisement
Table of Contents
