Table of Contents
Advertisement
Error Messages on PC Monitor Display
Error Code
hpe5022_ERROR_FILE_ACCESS
hpe5022_ERROR_FUNCTION_NOT_LOADED
hpe5022_ERROR_HARD
hpe5022_ERROR_HARD_HAMP
hpe5022_ERROR_HARD_MISS
hpe5022_ERROR_INACCURATE_BER
hpe5022_ERROR_INTERNAL
hpe5022_ERROR_INTERLOCK
hpe5022_ERROR_INV_BAS_HNDL
hpe5022_ERROR_INV_BAS_ID
Appendix B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Error Messages on PC Monitor Display
Description
Data log file in the auto
alignment operation can not
be created.
Unable to load the DLL file.
Perform the E5023A
installation software or
check if the file is installed
in the PC. The location of
DLL file is described in
Chapter 2 of the
programming manual.
Detected a hardware error
in the system.
Detected a hardware in the
head amplifier board.
The media or HGA cassette
is missing or the selected
hardware is not installed.
Check if they are placed
properly.
Too many Bit Error Rate
happens and measurement
result is not correct. Need to
optimize the measurement.
Unexpected internal error
occurred.
The spinstand is out of air
or vacuum or emergency
switch has been turned on.
Check if air or vacuum is
supplied to the spinstand or
reset the emergency switch.
Detected the invalid base
segment handle parameter
in UDS. Check your
program.
Detected the invalid base
segment ID parameter in
UDS. Check your program.
Error Messages
381
Advertisement
Table of Contents
