Table of Contents
Advertisement
CAUTION
Do not re-use the pads once you remove them with tweezers. Because the pads might have
been damaged by tweezers.
Step 3. Clean the ditchs and confirm there is no dust.
Step 4. Mount the new short pad on the board with fingers. Do ware gloves. Do not use tweezers.
The orientation of the pad is shown in Figure G-7.
Figure G-6
Mounting the Short Pad
Figure G-7
Pads Orientation
Appendix G
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
E5029K Connection Board Maintenance
Connection Pad Replacement
429
Advertisement
Table of Contents
