Table of Contents
Advertisement
NOTE
To set the erase type (DC+ / DC- / AC), click on [More Config.], to open the setup menu
and select the type in the [Erase Type] parameter.
3. The [More Config.], [Pattern Config], [Register Config.], [BER Config.] and [Ch Qual.
Config.] buttons are added for additional configurations. Click on any of these buttons
to set a new parameter value as required by measurement applications. The [BER
Config.] menu have the same setting and format as the [Configuration] of the BER
Main menu.
4.
Click the [Measure] button to start measurement. When [Auto Scale] is pressed the
graph scale will adjust itself automatically to its maximum and minimum values.
Measurement
The upper left portion of the menu shows the computed [Ch Quality] based on the
Display
displayed [Data Rate] as pointed by the arrow in the graph scale.
5. Click the [Return] button to return to BER Main menu.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Measurement
183
Advertisement
Table of Contents
