Table of Contents
Advertisement
VEE Measurement Program Operation
Starting the VEE measurement program
Starting the VEE measurement program
1. Click on [Start] > [Programs] > [Agilent Hard Disk ReadWrite Test System] > [Test
Figure 3-2
Default Setting Selection Menu
NOTE
If you install a new kind of module or box instrument into the system, you must select
"Starts with the default setting" at first time execution. Otherwise, VEE measurement
program does not recognize the module. Then, load your setting in the configuration menu
and re-store the setting.
2. Click [OK] it takes about 60 seconds to initialize the program.
46
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Environment (RunTime Version)] from the task bar of Windows 95/2000 to start the
program.
Before the program starts to initialize, a pop up window 'VEE START' will appear.
When 'Restore from file' is selected, a file menu will pop up that will allow you to load
the parameters stored in a text file. When 'Starts with the default setting' is selected,
measurement will start at default setting.
Chapter 3
Advertisement
Table of Contents
