Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Figure 3-74
Profile Setup Menu
Offset Start
Offset Stop
Offset Step
Offset NOP
7. Click on the [Band Erase] button to open the Band Erase Configuration menu.
130
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifies the starting point of the track offset
in building the track profile.This point is
defined as the distance in [µm] from the track
center.
Specifies the stopping point of the track offset
in building the track profile. This point is
defined as the distance in [µm] from the track
center.
Specifies the step by which the head is moved
while measuring TAA in order to build the
track profile. By setting this parameter with
Offset Start and Offset Stop, Offset NOP will
be computed and updated automatically.
Specifies the number of offset points. By
setting this parameter with Offset Start and
Offset Stop, Offset Step will be computed and
updated automatically.
Chapter 3
Advertisement
Table of Contents
