Table of Contents
Advertisement
Spectrum Analyzer Display
1. Click on [Configuration] > [Setup] > [Spectrum Analyzer Display] to open the
spectrum analyzer display setting. This parameter allows you to view the waveform on
the screen of the spectrum analyzer. This parameter is set to [ON] when the spectrum
analyzer is used manually. Press [Local] on the spectrum analyzer's front panel to
activate the spectrum analyzer.
NOTE
The LCD display of the spectrum analyzer is usually in the off-state when measurement is
in progress.
NOTE
This function can be activated when the system has the 4395A spectrum analyzer. When
the system has E4402B 3GHz spectrum analyzer, the waveform is always displayed on the
analyzer's display.
Figure 4-10
Spectrum Analyzer Display Menu
2. Click the [Return] button to return to Setup menu.
NOTE
This function can be activated when the system has the 4395A spectrum analyzer. When
the system has E4402B 3GHz spectrum analyzer, the waveform is always displayed on the
analyzer's display.
Chapter 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configuration
Configuration
227
Advertisement
Table of Contents
