Table of Contents
Advertisement
When "Optimize Sequence" is set to custom, the user can set up the sequence in any
order as required by measurement applications.
[Optimize] > [Sequence Setup] (When Optimize Sequence is Custom)
To add or insert a new parameter, select it in the 'Parameters' list and click on
[Insert>>] and/or [Add>>] button. To edit or remove a previously set up parameter,
select it in the 'Sequence' list and click on [Change] and/or [Delete] button. The setup
parameters will be displayed on the sequence frame of the [Optimize] menu.
6.
Click the [Return] button to return to [Optimize] menu.
7.
Click on the [Exec. Optimize] button to execute optimization.
8.
Click the [Return] button to return to BER main menu.
The [More Config.], [Pattern Config.], [Register Config.], [BER Config.] and [Ch Qual.
Config.] buttons are used for additional configuration settings. Click on any of these
buttons to set a new parameter value as required by measurement applications.
Measurement
The upper left portion of the main menu shows the [Ch Quality], [Error Count], [# of Lost
Results
Sectors] and [Total Sectors]. [Error Count] counts the number of detected error bytes per
sector. The [# of Lost Sectors] counts the sector where the synchronous pattern is not
detected. [Total Sectors] represents the total number of sectors measured.
[Configuration] Menu
The [Configuration] menu is provided in the Agilent Technologies E5039A/B 'Manual
Supplement' because configuration is dependent on each channel IC characteristics.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
good reshaping and better equalization of the
read-back pulses.
Measurement
169
Advertisement
Table of Contents
