Table of Contents
Advertisement
Delay Stop
Delay Step
NOP
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
3. Click the [Measure] button to start measurement.
4. Click the [Return] button to return to Measure menu.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies the time to stop the delay for write
precompensation.
Specifies the step by which the time delay is
incremented from [Delay Start] to [Delay
Stop]. When you set this parameter with
[Delay Start] and [Delay Stop], [NOP] will be
computed and updated automatically.
Specifies the number of points to measure
NLTS. When you set this parameter with
[Delay Start] and [Delay Stop], [Delay Step]
will be computed and updated automatically.
Measurement
125
Advertisement
Table of Contents
