Table of Contents
Advertisement
Freq. Mode
Write Pos.
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
3. Click on the [Measure] button to start measurement.
Measurement
The menu shows the mean, min, max and std.deviation of the measured side reading.
Display
The graph displays the side reading result for every revolution.
4. Click on the [Return] button to return to Measure menu.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies the setting of the measurement
frequency. Select either Auto Mode or Manual
Mode. If Auto is selected the measurement
frequency is automatically set. If Manual is
selected the frequency specified by Center
Freq. will be used to measure.
Specifies the write position for both side
tracks.
Measurement
199
Advertisement
Table of Contents
