Table of Contents
Advertisement
menu and select the type in the [Erase Type] parameter.
3. Click the [Measure] button to start measurement. When [Auto Scale] is pressed, the
graph scale will adjust itself automatically to its maximum and minimum values.
4. Click the [Return] button to return to Measure menu.
Measurement
The measurement window shows the measured noise expressed in terms of rms volts.
Display
The plotted spectrum shows the measured signal since positive peak is chosen as the
detection mode.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Measurement
159
Advertisement
Table of Contents
