Table of Contents
Advertisement
Figure 3-118
Sectored Overwrite Menu
Channel Bit Rate
Write Current
Sense Bias
OverwriteHF
OverwriteLF
Track #
Average
# of Sectors
# of Sectors for Gap
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Bias that have been set
in [Configuration] menu will automatically update similar parameters in this menu.
4. Click [Measure] button to start measurement.
Measurement
The menu shows the mean, minimum, maximum and standard deviation of the
Display
measured Sectored Overwrite.
5. Click [Return] button twice to return to Measure menu.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies the speed at which data bits are
written on the media per second [bps].
Specifies the current applied to the write head.
Specifies the sense bias applied to the read
head.
Specifies the repetitive period of the HF
pattern for overwrite measurement.
Specifies the repetitive period of the LF
pattern for overwrite measurement.
Specifies the track number to be tested.
Specifies the number of revolutions to get the
average results.
Specifies the number of sectors to divide.
Specifies the number of sectors to skip after
writing one sector.
Measurement
195
Advertisement
Table of Contents
