Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
3.
Figure 3-96
Sweep Configuration Menu
146
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Track #
Write Time
Delay
Read Time
Click on [Sweep Config] to set the sense current and off-track position parameters.
Sense Curr. Start
Sense Curr. Stop
Specifies the track number to be tested.
Specifies the time to perform write excitation.
This parameter is expressed in terms of
[msec].
Specifies the distance in time between write
excitation and read operation. This parameter
represents the delay time when to read the data
after write. This parameter is expressed in
terms of [msec].
Specifies the amount of time to read the data.
This parameter is expressed in [msec].
Specifies the starting point of the sense
current.
Specifies the stopping point of the sense
current.
Chapter 3
Advertisement
Table of Contents
