Table of Contents
Advertisement
Error Messages
Error Messages on PC Monitor Display
Error Messages on PC Monitor Display
Table shows the error messages that could appear on the PC monitor display when you use
a demo program or other programs created by the user.
Error Messages on PC Monitor Display
Error Code
hpe5022_ERROR_AUTO_CONFIG_FAILED
hpe5022_ERROR_AUTO_RANGE_FAIL
hpe5022_ERROR_CAL_DATA_CORRUPT
hpe5022_ERROR_CAL_FAILED
hpe5022_ERROR_CLOSE
hpe5022_ERROR_CONFLICT_PREC_PATTERN
hpe5022_ERROR_D50_NOT_FOUND
hpe5022_ERROR_DATA_CORRUPT
hpe5022_ERROR_EXCESS_TRACK_DATA
380
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
The auto configuration has
failed. Check if the
parameter and head is
correct.
The auto range has failed.
Check if the parameter and
head is correct.
Calibration data stored in
the system or head amplifier
board was corrupt. Need to
perform the calibration
again.
Calibration is failed. Check
the configuration and
cabling, then re-try the
calibration.
Unable to close some
components (instruments
and the spinstand).
The precompensation
pattern has conflict.
Can't find the D50
parameter point. Check the
result of the roll off
measurement.
The measurement data is
corrupt. Check if your
measurement sequence is
correct.
The data overflows a track
at one revolution. Change
the setting of the user data
rate, rpm, track number,
track format or sector
format.
Appendix B
Advertisement
Table of Contents
