Table of Contents
Advertisement
Error Messages on PC Monitor Display
Error Code
hpe5022_ERROR_INV_SEQ
hpe5022_ERROR_INV_SEQ_HNDL
hpe5022_ERROR_INV_SETUP
hpe5022_ERROR_INV_TRIG_PORT
hpe5022_ERROR_MEM_ALLOC
hpe5022_ERROR_MEMORY
hpe5022_ERROR_MICRO_TRACK_FAILED
hpe5022_ERROR_MOTOR_FAULT
hpe5022_ERROR_NO_OPTION
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_NDEF_HGA
Appendix B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Error Messages on PC Monitor Display
Description
Sequence is invalid. Check
your program.
Detected the invalid
sequence handle parameter
in UDS. Check your
program.
Detected an error in
operation. There must be
some illegal set-up in the
parameters. Check your
program.
Invalid trigger port is
selected as the parameter
'trigPort'.
Can't allocate enough
memory. Reboot your PC.
Check sum error occurred
in the calibration data or
user data.
Failed to create a micro
track. The measured TAA
level did not reach the
specified level. Check the
parameters for micro track
measurement.
An error is detected in the
motor or servo of the
spinstand. Check the
spinstand and restart the
system.
An option is not installed to
perform the required
measurement and function.
System is not initialized.
Check if the required
modules and options are
installed.
The cassette parameters and
type are undefined. Specify
the cassette parameter.
Error Messages
383
Advertisement
Table of Contents
