Table of Contents
Advertisement
Figure 3-71
Triple Track Menu
NOTE
Before you execute this measurement, you must execute the auto configuration to set the
input range automatically, or set the input range manually.
Program Read Offset
Auto TAA Range
4. Set the parameters, click on each button to enter a new value.
Channel Bit Rate
Write Current
Sense Current
Track #
Squeeze Pos.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies the auto setting of the read-write
offset after the track profile is measured. If
checked the write offset and read offset of the
[Setup] menu will be changed and updated
automatically and this will be used in
subsequent tests. The write offset is set to zero
while the read offset is set to the read-write
offset "RW Offs" value of this measurement.
(Specifies the TAA range to auto mode). If
checked, it will eliminate an overflow in TAA
measurement. The input range automatically
adjusts itself to an appropriate range when an
overflow occurs. See
"hpe5022_isolatedPulseReferenceTaa Auto"
of the programming manual. for details.
Specifies the speed at which data bits are
written on the media per second [bps].
Specifies the current applied to the write head.
Specifies the current applied to the read head.
Specifies the track number to be tested.
Specifies the distance between the test track
Measurement
127
Advertisement
Table of Contents
