Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
[Bathtub] Menu
Measurement
1. Click on the [Bathtub] button from the BER Main menu to open the bathtub menu.
Procedure
2. Set the parameters, click on each button to enter a new value.
184
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Exec. Optimize
Abort
OTC Threshold
Meas. Bytes
BER Pattern #
Average
Track #
Optimizes the setup parameters in the
[Optimize] menu for optimum measurement
results. Optimization is required whenever
you change the 'User Data Rate' and 'Endec'
parameters.
Aborts unexpected long measurements.
Specifies the off-track capability threshold.
The threshold limit can be set from 0 min. to 1
max.
Specifies the number of bytes to be measured.
Specifies the pattern number to be used to
write the data pattern. The data pattern of the
selected pattern number must be specified in
the [Pattern Config.] menu in advance.
Specifies the number of revolutions to get the
average result. Average count is equal to the
number of times a measurement sequence is
repeated.
Specifies the track number to be tested.
Chapter 3
Advertisement
Table of Contents
