Table of Contents
Advertisement
Figure 3-43
Stability Write Configuration
Write Pattern
Write Mode
4. Click the [Measure] button to start measurement. Results are displayed after
measurement.
Measurement
The window shows the measurement results of TAA from the specified number of
Display
counts [# of Counts]. The mean, minimum, maximum and standard deviation of the
measured narrow band TAA are displayed on the upper right portion of the menu.
5. Click the [Return] button to return to the Measure menu.
See also
See the "Absolute Stability Measurement function" section in Chapter 3 of the
programming manual.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies the write excitation pattern for
stability measurement.
Specifies the write data polarity when writing
the data. When 'Fixed' is selected the write
current direction of each write operation is the
always the same. When 'Continuous' is
selected the write current direction at the
beginning of write operation is the same as the
last current direction of the previous write.
Refer to the programming manual for details.
Measurement
91
Advertisement
Table of Contents
