Agilent Technologies E5022A Operation Manual page 242

Equation 5-3 Modulation Positive Definition
Equation 5-4 Modulation Negative Definition
Figure 5-1 TAA Measurement Definition
When the parametric module is used for TAA measurement, the module requires a rough
pulse width value to measure the TAA. The reason is as follows:
The sensitivity of the peak detector in the module is changed depending on the pulse width.
As the pulse width becomes narrower, the gain of the peak detector becomes lower. So that
the module can compensate the measured amplitude level for pulse width.
The pulse width value is calculated from the PW reference value which is specified by the
"hpe5022_pwReference" function. See "Input Range Control & Auto Configuration" on
page 308..
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
TAA
Modulation = -------------------------------------------------------- -
Pos
TAA
Modulation = --------------------------------------------------------
Neg
Measurement Definition
Measurement Parameter Definition
Ð TAA
RawDataMax
TAA
Ð TAA
RawDataMin
TAA
241