Table of Contents
Advertisement
will vary depending on measurement applications. This section explains how to set the
input range automatically.
5. Performing measurement. Typical measurement and functions have been built-in on
Agilent E5022/E5023. This section explains the parameter setting for each
measurement.
6. Exit the VEE measurement program. This section shows how to end the program.
Measurement settings can also be executed using DLL function of Agilent E5022/E5023.
Refer to the programming manual for the DLL's detailed descriptions.
NOTE
Proper values for each parameter described in this chapter must be used. Each parameter
value depends on individual head characteristics that you use. DO NOT use the parameter
values described in this chapter.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Introduction
45
Advertisement
Table of Contents
