Table of Contents
Advertisement
Measurement Definition
Measurement Parameter Definition
sequence in the create micro track and the bit error test.
In the create micro track, the head position is compensated before erasing a positive side
edge when the track offset compensation state is turned on. See the programming manual
for detailed sequence.
In the bit error test, the position is compensated at each revolution specified by the
"hpe5022_BER_trackOffsetCompInterval" function when the track offset compensation
state is turned on. The E5022A reads the data several revolutions in this test in order to
make a small bit error rate measurement. In this case, this function reads the burst data and
compensates the head position at each revolution specified by the
"hpe5022_BER_trackOffsetCompInterval" function.
Chapter 5
281
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
