Table of Contents
Advertisement
Ramp Load
Ramp Load Positioning Utility
Overview
The ramp load positioning utility has the following menu windows.
Main Menu
The task list of the buttons in the main menu is as follows.
Figure H-12
Main Menu
Positioning Step
Up/Down/Right/Left Move the head toward the up, down, right, or left side of the media.
HGA up
HGA down
Ramp In
Ramp Out
Goto Ramp Position Unload the head and move it to the ramp load position.
Goto Media Position Unload the head and move it to the media load position.
Goto Home Position Unload the head and move it to the home position.
Ramp to Media Position Enter the distance between the ramp load position and the
Store Ramp/Media Position... Save the positioning data, ramp load position and media
Test...
Close
442
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Select the amount of the step. Each step is defined as the distance
travelled by the stage each time the direction button is pressed. It range
from 0.1mm to 20mm. use a large step value to move the head close
enough to the required location, then use a smaller step value for fine
adjustment.
Perform the unload.
Perform the load.
Move the ramp to the Ramp In position.
Move the ramp to the Ramp Out position.
media load position.
load position.
Open the "Ramp Load Test" menu as shown in Figure H-13.
Close the ramp load positioning utility.
Appendix H
Advertisement
Table of Contents
