Table of Contents
Advertisement
Figure 3-123
Track Search Menu
2. Set the parameters, click on each button to enter a new value.
Track #
Radius
Skew
Band Erase Range
Band Erase Pitch
Search Range
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies a track number of the start position.
After the track search is done, this shows -1
and Radius/ Skew show where the track is.
Either 'track#' or 'radius'/'skew' should be
specified.
Specifies a Radius of the start position. After
the track search is done, this shows the
position where the track is. Either 'track#' or
'radius'/'skew' should be specified.
Specifies a skew of the start position. Even
after the track search is done, this is not
change.
Specifies the range of erase. Clicking [Erase]
button erases a whole area between minus this
value to plus this value from the start position
specified in 'track #' or 'radius'/'skew'.
Specifies a pitch of the erase. The head is
moved by this pitch, then continue to erase a
track.
Specifies the range of search a track. Clicking
[Search] button searches a track between
minus this value to plus this value from the
start position specified in 'track #' or
'radius'/'skew'.
Measurement
203
Advertisement
Table of Contents
