Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
3. Click the [Measure] button to start measurement. Results are displayed after
Measurement
Display
4. Click the [Return] button to return to Measure menu.
See also
See the "Waveform measurement function" section in Chapter 3 of the programming
manual for the parameter range and its detailed description.
96
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
measurement.
The number of waveform periods are averaged and displayed on the window. The
upper portion of the window shows the TAA, PW and Baseline results.
1)[Erase Write Meas.] means to perform a DC
erase, write data then measure. 2)[Write
Meas.] means to write data, then measure. 3)
[Meas.] means to measure only.
Chapter 3
Advertisement
Table of Contents
