Table of Contents
Advertisement
Figure 5-52
Evaluation of Write Track Width and Read Track Width
d. Calculate the distance between the center of the track (i.e, at zero offset) and the
center of the write track width. And denote the measured distance as "Read/Write
Offset (RW offset)."
Figure 5-53
Evaluation of Read Write Offset
e. Calculate "Squash" using the following equation:
Squash =
where,
TAAmax: "OTRC Signal[ ]" value at maximum TAA position
TAAsquash: "Squeezed Signal[ ]" value at "TAAmax" position
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Parametric Sweep Measurement Definitions
TAAsquash
----------------------------- -
TAAmax
Measurement Definition
301
Advertisement
Table of Contents
